Prepare
First, download and install CrypTool.
If using a Windows® PC, install CrypTool 1.
If using a MAC PC, install JCrypTool.
Note: In order for the CrypTool program to function, you must first OPEN a text file. Only then will items on the toolbar become enabled.
Additional information for this assignment is covered in the Assignment 3 — CrypTool Lab document.
Part 1.1
Identify the digital signature schemes and MAC schemes that are supported by CrypTool. For each scheme, determine the key sizes supported by CrypTool and which key sizes are recommended by NIST.
Encrypt text using two digital signature schemes, measure the execution time for key generation (if applicable), signature generation, and signature verification. Measurements should be performed multiple times, and then the analysis should use the average time for comparisons. In order to obtain measurable results, you will likely need to use long messages (i.e., 5 MB or larger).
Record results and draw conclusions. Identify the encryption algorithm used. Discuss the results of the measurements and any variations or trends observed when comparing the results from the group members. Report the results and the analysis. Be sure to include details on the measured results and details on each member’s computer (i.e., processor type, speed, cache size, RAM size, OS, etc.).
Part 1.2
Using CrypTool, generate an MD5 hash for a small plaintext document.
Record the hash result (cut and paste).
Change one character in the plaintext and regenerate a hash on the changed text.
Record the hash (cut and paste into your report).
Do you think you could find a hash collision (that is, can you find two different texts that produce the same hash)? Experiment a few times and draw a conclusion about whether this can be done easily.
Part 1.3
Generate a large prime (at least 20 digits long) and a short prime (less than 10 digits in length) (HINT: Individual Procedures RSA Cryptosystem Generate prime numbers).
Determine which factorization algorithms are implemented within CrypTool (Indiv. Procedures -> RSA Demonstration -> Factorization of a Number).
Identify the characteristic features of these algorithms by reading the “Factorization algorithms” help within the tutorials section of CrypTool’s built-in help.
Try to factor the primes using some of these methods.
Report your results, identifying the methods you used. Be sure to include how long the factorization took (or how long it was estimated to take if it was not completed in a reasonable time).
Now, just enter numeric values to be factored (again, one long number and one short one).
What are the results? Were factors found? Are you good at guessing prime numbers?
Unit3Assignment.html.zip
Unit 3 Assignment.html
assignment deTails
Assignment 3
Outcomes addressed in this assignment:
Unit Outcomes:
Evaluate asymmetric key cryptography, including the implementation of at least one asymmetrical algorithm.
Explain the role asymmetric algorithms play in securing network protocols.
Examine the similarities and differences between symmetric and asymmetric encryption.
Course Outcome:
IT543-2: Evaluate various cryptographic methods.
Assignment Instructions:
Prepare
First, download and install CrypTool.
If using a Windows® PC, install CrypTool 1.
If using a MAC PC, install JCrypTool.
Note: In order for the CrypTool program to function, you must first OPEN a text file. Only then will items on the toolbar become enabled.
Additional information for this assignment is covered in the Assignment 3 — CrypTool Lab document.
Part 1.1
Identify the digital signature schemes and MAC schemes that are supported by CrypTool. For each scheme, determine the key sizes supported by CrypTool and which key sizes are recommended by NIST.
Encrypt text using two digital signature schemes, measure the execution time for key generation (if applicable), signature generation, and signature verification. Measurements should be performed multiple times, and then the analysis should use the average time for comparisons. In order to obtain measurable results, you will likely need to use long messages (i.e., 5 MB or larger).
Record results and draw conclusions. Identify the encryption algorithm used. Discuss the results of the measurements and any variations or trends observed when comparing the results from the group members. Report the results and the analysis. Be sure to include details on the measured results and details on each member’s computer (i.e., processor type, speed, cache size, RAM size, OS, etc.).
Part 1.2
Using CrypTool, generate an MD5 hash for a small plaintext document.
Record the hash result (cut and paste).
Change one character in the plaintext and regenerate a hash on the changed text.
Record the hash (cut and paste into your report).
Do you think you could find a hash collision (that is, can you find two different texts that produce the same hash)? Experiment a few times and draw a conclusion about whether this can be done easily.
Part 1.3
Generate a large prime (at least 20 digits long) and a short prime (less than 10 digits in length) (HINT: Individual Procedures RSA Cryptosystem Generate prime numbers).
Determine which factorization algorithms are implemented within CrypTool (Indiv. Procedures -> RSA Demonstration -> Factorization of a Number).
Identify the characteristic features of these algorithms by reading the “Factorization algorithms” help within the tutorials section of CrypTool’s built-in help.
Try to factor the primes using some of these methods.
Report your results, identifying the methods you used. Be sure to include how long the factorization took (or how long it was estimated to take if it was not completed in a reasonable time).
Now, just enter numeric values to be factored (again, one long number and one short one).
What are the results? Were factors found? Are you good at guessing prime numbers?
Written Assignment Requirements:
Written work should be free of spelling, grammar, and APA errors. Points deducted from the grade for writing, spelling, or grammar errors are at your instructor’s discretion.
For more information and examples of APA formatting, see the resources in Academic Tools.
Directions for Submitting Your Assignment:
Compose your assignment in a Word document, save it as IT543 YourName_Unit_3.doc, and submit it to the Dropbox for Unit 3.
Interested in getting help with this assignment?
Get a professional writing team to work on your assignment!
Order Now
Recent postsFor this final assignment, you will prepare a brief paper detailing the steps undertaken to complete a presentation that disseminates information you assemble
Please choose to answer only one of the 2 following questions. Option 1: In your opinion and based on scientific, peer-reviewed published evidence, does child
At the beginning of the previous academic year, the institution announced it would drop football at the conclusion of the season. The announcement created pub
you will review current research in Personality and provide a critical evaluation of that personality research through an annotated bibliography. An annotated
In Module 5, we considered the third in our three-part series on research design. Specifically, the focus was on the longitudinal studies, in which the resear
Need help with a similar or different Task?
We have the best writers to help you. Hire Writer Now
